四川中商升创科技有限公司
服务热线:
13778025336
products center
产品中心
Contact Us
联系我们

四川中商升创科技有限公司  

联系人:张先生  

手机:13778025336  

QQ:1987975100  

地址:绵阳市涪城区绵安路35号

你现在的位置:网站首页 > 产品中心 > 特种阀门系统--高精度电动伺服 > 特种阀门系统--高精度电动伺服
特种阀门系统--高精度电动伺服针型调节阀
更新时间:2019-07-22 10:57:48
二、高精度电动伺服针型调节阀(High precision electric servo needle regulating valve)高压高精度针形调节阀采用高精度文丘里喉...
二、高精度电动伺服针型调节阀(High precision electric servo needle regulating valve)


高压高精度针形调节阀采用高精度文丘里喉道及高精度阀针结构,具有整体系统性能稳定、气体输出端流速平稳、高灵敏度位置反馈、高精度控制、可调比宽等优点。其中,阀门可调比高于1:300,比国内同类产品的1:30提高了10倍,阀门可控分辨率达到0.05%,一般气流量可控制精度达0.3%。
High-pressure and high-precision needle valve adopts high precision Venturi throat and high-precision valve needle structure, which has the advantages of stable overall system performance, smooth flow of gas output, high sensitivity position feedback, high precision control and adjustable ratio. Among them, the valve adjustable ratio can be adjusted higher than 1: 300, compared to the 1:30 that of the similar products in China, which increased by 10 times combined with the valve control resolution of 0.05% and the general air flow control accuracy of 0.3%.
该产品相比全电子系统控制阀、集成箱体等类型控制阀,控制精度高,运行稳定,输入、输出端均采用高压连接法兰方式。不锈钢及性能更优的材质结构外表面,均采取特殊******的技术处理,外表面整洁美观;该产品是国内首批研制,且国外无同类产品,能替代国外类似产品,市场竞争能力强。
Compared with the full electronic system control valve, the integrated box and other types of control valves, this product has the virtue of high control precision, stable operation, in the reason of that its input and output terminals are high-pressure connection flange. Stainless steel and better performance of the material structure of the outer surface, are taken to special advanced technology. Therefore, the outer surface is neat and beautiful. The product is the first batch of domestic development, and no similar foreign products, which can replace correlative overseas products with strong market competition ability.
该产品进入系列和批量、规模生产后,对产品开发人员、技术人员和制造人员的需求将持续增长,促进当地***业。同时,在国家制造强国战略指导下,高端制造业对此类产品的需求也将持续增长。
When the product starts series, batch, and scale production, product developers, technicians and manufacturing staff demand will continue to grow and local employment will be promoted. At the same time, under the guidance of the national manufacturing strategy, high-end manufacturing demand for such products will experience a sustainable growth as well.
\\
型号:    YH07-□ □ □ □□ □ □□ 
                                      
                ① ② ③  ④  ⑤  ⑥             
 详解(Detailed):
   ①  类型代号(type code):针型调节阀(ZJ)(needle type regulating valve )(ZJ) 
②  阀门驱动方式代号(valve actuation code):6气动(pneumatic),9电动(electric),10电气复合(electrical composite) 
   ③阀门连接端连接形式代号(connection form of valve connection code): 
\\
⑥   流水号(serial number); 产品编号(product number);
其他技术指标:
   ⑦   进出口连接口径:DN10~DN600;
⑧   流量范围:0.01Kg/s~24Kg/s,特殊要求另行注明;
⑨   流量控制调节分辨率:±0.1g/s~±10g/s,更高特殊要求另行注明;
⑩   压力控制调节精度及调节时间:0.1%~1%;稳压调节时间:﹤5s~15s,特殊要求另行注明;
⑪   基本控制方式:电动伺服位置闭环为内环,如压力闭环/流量闭环为外环,其他殊控制要求需另行注明;
⑫   全行程针范围及控制精度:5mm~400mms,±0.01mm;
⑬   全行程动作响应时间:3s~20s;
⑭   流量特性级:线性;
⑮   额定流量工作压力损失:0.1~0.5阀前工作压力;
⑯   工作介质:压缩空气,特殊要求另行注明;;
⑰   介质温度范围:-20℃~400℃;
⑱   泄露等级:全关状态ANSI 1~5级;
⑲   电动伺服定位驱动器:瑞士MAXSON,美国PAKER等高精度电动伺服,特殊要求另行注明;
Other technical indicators:
⑦ import and export connection diameter: DN10 ~ DN600;
⑧ flow range: 0.01Kg / s ~ 24Kg / s, special requirements specified otherwise;
⑨ flow control adjustment resolution: ± 0.1g / s ~ ± 10g / s, higher special requirements specified otherwise;
⑩ pressure control regulation accuracy and adjustment time: 0.1% ~ 1%; regulator regulation time: <5s ~ 15s, special requirements specified otherwise;
⑪ basic control mode: closed position of electric servo position is inner ring, for example, pressure closed loop / flow closed loop is outer ring, other special control requirements shall be separately stated;
⑫ full stroke range and control accuracy: 5mm ~ 400mms, ± 0.01mm;
⑬ full stroke action response time: 3s ~ 20s;
⑭ flow characteristics level: linear;
⑮ rated flow operating pressure loss: 0.1 ~ 0.5 working pressure before valve;
⑯ working medium: compressed air, special requirements specified otherwise;
⑰ medium temperature range: -20 ℃ ~ 400 ℃;
⑱ leakage rating: fully closed state ANSI 1 ~ 5;
⑲electric servo positioning drive: Switzerland MAXSON, the United States PAKER and other high-precision electric servo, special requirements specified otherwise;
 

  • 上一篇:已经没有了
  • 下一篇:已经没有了